BlueTree 5000 Betriebsanweisung PDF herunterladen (Seite 49)

11 Hardware Installation

11.1 Mounting the BT-5x00v2 series modem

 Horizontally mount the modem using four #6 screws pan or fillister head onto its mounting feet

11.2 Mounting the BT-6000 series modem

There are 3 different ways to mount a BT-6000 series modem:

 Horizontally using two #6 screws pan or fillister head onto its horizontal mounting feet

 Vertically using two #6 screws pan or fillister head onto its vertical mounting feet

 Vertically using a DIN rail clip

11.3 Cellular antenna

The selected cellular antenna(s) must meet the following specifications:

 Maximum rated gain of 3dBi for Cellular band and 4dBi for PCS band

 Frequency bands:

 CDMA: Dual-band 800 & 1900 MHz

 EDGE: 850/1900/900/1800 MHz

 HSPA: 850/1900/2100 MHz

 Nominal 50 ohm impedance

 Voltage Standing Wave Ratio (VSWR) less then 2.5:1

 Male SMA connector

The length of the antenna cable may affect the signal strength. Choose the appropriate cable type and length. The table

below provides can help pre-determine the loss to expect.

Table 11 – dB loss per 100 feet of cable type

Cable type

Loss per 100 feet

8216 (RG58)

31 dB

8267 (RG213)

7.6 dB

LMR-400

3.9 dB

LMR-500

3.15 dB

LMR-600

2.5 dB

LMR-1200

1.26 dB

11.3.1 Installation and verification

When installing the antenna, follow the FCC and Industry Canada guidelines and keep the following in mind:

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 68 69

Keine Kommentare

BlueTree 5000 Betriebsanweisung Seite 49