BlueTree 5000 Betriebsanweisung PDF herunterladen (Seite 46)

11.8.4 Connecting an analog gauge or source (0-5Vdc) to the

modem’s analog input:

Figure 27

1. Connect the negative side of the analog source to GND.

2. Connect the positive side of the analog source (0VDC - 5VDC) to one of the 2 digital

inputs.

3. These analog inputs are not designed to detect a signal at high speed. This approach

was adopted to minimize the errors which could be caused by the noise of high

frequencies captured by wiring. The detection of a DC source with a slow variation will

not cause any problems.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 66 67

Keine Kommentare

BlueTree 5000 Betriebsanweisung Seite 46