BlueTree 5000 Bedienungsanleitung PDF herunterladen (Seite 10)

3 Basic Commands

3.1 D, DP and DT: Dial Command

Description

The ATD command is used to originate a data call.

The ATD command could be used to setup the modem in Serial IP mode.

The ATDT command is equivalent to the ATD.

The ATDP command is used to dial with pulses instead of tones.

Availability

Since FW version 1.1.1

Command Syntax

ATD<Phone number>

ATD<IP>,<Port>[,<Transport>]

ATDP<Phone number>

Response Syntax

CONNECT Call succeeds, for data calls only

BUSY If the called party is already in communication

NO ANSWER If no hang up is detected after a fixed network time-out

NO CARRIER Call setup failed or remote user release.

ERROR Can not establish TCP connection or meet other issues

Defined Values

0-9#*... Called phone number, sequence of digits and special characters (#,

*, …)

<IP>

nnn.nnn.nnn.nnn IP address (dotted decimal) of remote destination

<Port>

1501-65535 IP port number

0 UDP (Default)

1 TCP

Example:

Commands Responses

ATD5551212 BUSY

ATD5551212 CONNECT

ATD200.100.100.5,2000,1 CONNECT

Connection Setup process:

 Establishing a connection to a phone number

o When the phone number is identical to the one stored in the connection profile (see 8

Wireless Network Connection Profile), the modem is setup as a router

o When the phone number is different from the one stored in the connection profile, the

modem is setup in simple modem mode.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 129 130

Keine Kommentare

BlueTree 5000 Bedienungsanleitung Seite 10