BlueTree 5000 Bedienungsanleitung PDF herunterladen (Seite 9)

Notes:

 Parameters that include spaces or comma must be enclosed in quotes (")

 ? is optional for query-only AT commands

 Parameters shown between square brackets ([]) are optional. When not specified, the

default value for those parameters is used.

2.2 AT Command response codes

Responses start and end with the <CR><LF> characters.

When the modem cannot interpret a command, it returns the ERROR string. This is also the case

when a command intended for the RF module is issued while in a call.

When the command is successful, the modem appends an OK to the end of the response.

Command responses usually start with the command name followed by a column.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 129 130

Keine Kommentare

BlueTree 5000 Bedienungsanleitung Seite 9